Barazza 1FEVEVCN, Инструкция по эксплуатации

Страница: 18 / 76

18
Descaling procedure
1. Rotate the left knob to enter the
“General
Settings” menu.
2. Rotate the right knob until the descale
symbol appears on the right side of the
display.
3. Press the to start the descaling
function.
4. The display shows the following message
5. Remove the water tank. Pour 0.5 liters of
an adequate descaling solution into the
water tank and put the water tank back.
6. Press . The Descale cycle is initiated
and takes about 30 minutes.
7. The descaling process is silent and during
this process, the display shows the
percentage of the process.
8. The display shows the message and
the oven emits a beep.
9. Fill the water tank with 0,8 liters of fresh
water and put the water tank back.
10. Close the panel The first rinsing cycle
starts.
11. When the display shows the previous
message again and the oven emits a
new beep, remove and empty the water
tank.
12. Fill the water tank with 0.8l of cold water
and put the water tank back.
13. Close the panel. The second rinsing cycle
starts.
14. When the rinsing cycle has finished the
display shows the following message and
emits a beep, until the water tank is
removed.
15. Remove, empty and dry the water tank.
Descale warnings
Display Description
1
st
warning - Appliance must be descaled.
The symbol will be shown on the display until the
oven is descaled.
2
nd
warning
– the oven shows the menu to start
descaling or to do it later.
If the “Later” option is selected the oven will return
to the previous screen. At this stage, the oven
allows you to finish a cooking process.