Barazza 1ABEVG, Инструкция по эксплуатации

Страница: 22 / 32

22
The device beeps and displays an information message.
It then switches to preservation mode which maintains the temperature of -18°C inside the appliance until the
intervention of the user and for a maximum of 24 hours. During this phase, the appliance automatically defrosts.
3.18.9 Thawing
This cycle brings foods from freezing temperature to +2°C without loss of liquids and without starting the
cooking process, avoiding the protein processing that happens, for example, when defrosting meat in the
microwave.
THAWING
Options
Type of food : specify the type of food to be chilled.
Preparation : specify if the food on the tray is whole or in a different form (i.e.: sliced, diced,
in pieces, etc.).
Weight : select the quantity of food on the tray.
Before starting
It is possible to verify the information in the summary screen and, if necessary, modify the
duration of thawing process. The factory pre-set duration value blinks and by single press it is
possible to access to the screenshot where it is possible to modify the duration value.
During the program The display shows the settings and the remaining time to the end of the program.
AT THE END OF THE PROGRAM
The device beeps and displays an information message.
It then switches to preservation mode which maintains a temperature of +2°C inside the appliance until the intervention
of the user.
3.18.10 Ready to serve
This program warms previously cooked food kept in the refrigerator, or foods which have been acclimatised
to normal room temperature, allowing them to be served at the correct temperature.
Note : when operating in this mode, accessible parts may become very hot: keep children away. Be
careful not to touch the hot surfaces of the appliance and always use oven gloves to remove or insert
accessories or heat-resistant cookware.
READY TO SERVE
It is possible to choose from two warming modes: "Ready" and "Delayed".
In the “Ready” operating mode, warming immediately begins when the cycle is started.
In the “Delayed” operating mode, warming takes place after a waiting period, during which the appliance preserves
the food at +4°C, thus allowing you to start the program in the morning and have your food at the right temperature
for lunch or dinner.
READY MODE
Options
Temperature : select the desired temperature of the air inside the appliance.
Cycle length : select the duration of the cycle.
Before starting It is possible to verify the information in the summary screen.
During the program The display shows the settings and the remaining time to the end of the program.
DELAYED MODE
Options
Temperature : select the desired temperature of the air inside the appliance.
Cycle length : select the duration of the cycle.
Delay: select how many minutes after the start of the program you would like the heating
to start.
Before starting It is possible to verify the information in the summary screen.