Operation manual
Bär SmartControl 2.0
40000001186_EN_03.docx
Page 27 / 39
Date: 31/03/2020
7
Operation
7.1 Logging in
7.1.1
Hand-held transmitter
Entry
Display
Description
The following prerequisites apply for logging in:
-
The hand-held transmitter is paired with the system.
-
The hand-held transmitter is located in the near field.
-
No other hand-held transmitter is logged in to the system.
-
The hand-held transmitter is not located in the docking
station.
The system is built into the truck:
Press “Truck” pushbutton briefly 2 x.
The green LED and red LED under the truck symbol
illuminate dimly.
If logging in is successful:
The green LED and red LED under the truck symbol
illuminate brightly.
Control voltage on Cargolift is switched on.
The system is built into the trailer:
Press “Trailer” pushbutton briefly 2 x.
The green LED and red LED under the trailer symbol
illuminate dimly.
If logging in is successful:
The green LED and red LED under the trailer symbol
illuminate brightly.
Control voltage on Cargolift is switched on.
na
2x
2x
