9
5
4
7
10
8
6
3
2
1
Fix wheels
Fix base shelf
Fix crossmember
Fix rear windshield
(5)
Fix side grill windshields
(7&8)
Fix each side table
(3&8)
Fix oven side supports
Slide oven onto trolley
Slide fire tray onto trolley
Place grill to complete
2 x M8 x 55mm
bolts nuts & washers
4 x M6 x 12mm bolts
8 x M6 x 12mm bolts
4 x M6 x 12mm nut & bolt,
Fit nuts on inside.
Position oven (10) so the side supports touch rear windshield
then lift lower centre clip at rear to secure.
Orientate with shelf (13) walls facing upward to prevent
items carried from rolling off the sides. Secure with 4 bolts.
Using 2 bolts to hold the sides to the frames and 2 nuts and
bolts to hold the windshields corners. Repeat for both sides.
Using 2 bolts hold the sides to the frames at the rear.
Using 2 bolts on each side hold crossmember (11).
Fit the axle bolt (14) from the inside of the assembly. Fit
locking nut on the outside of wheel (1), adjust to run free, repeat.
Using 4 bolts per table.
With a 30mm overhang at the rear of supports (15).
Unscrew oven door handle and re attach on the outside.
Position firetray (9) fix two nut & bolts through holes in firetray
with nut beneath to sit behind the oven to stop it sliding forward.
Place cooking grill (6) recheck all screws for tightness.
4 x M6 x 12mm bolts
2 x M6 x 12mm bolts
4 x M6 x 12mm bolts
4 x M6 x 12mm nuts & bolts
( Parts 1, 2, 14 )
( Parts 2, 12, 13 )
( Part 11 )
( Part 5 )
( Parts 7 & 8 )
( Parts 3 & 8 )
( Parts 10 & 15)
( Part 10 )
( Part 9 )
( Part 6 )
30mm
overhang
