18646_Ins_ZPS_BB_BM
Building Automation Products, Inc., 750 North Royal Avenue, Gays Mills, WI 54631 USA
Tel:+1-608-735-4800 • Fax+1-608-735-4804 • E-mail:[email protected] • Web:www.bapihvac.com
Zone Pressure Sensors (ZPS) - BACK MOUNT
Installation and Operation Instructions
4/6/07
rev.
Specifications subject to change without notice.
Product Identification
Fig. 1
Non-Display ZPS in a
BAPI-BoxBack Mount
Fig. 2
Rear Vew of ZPS in a
BAPI-Box Back Mount
Mounting
Mount the unit to its mounting surface with four #10 screws through the holes in the mount-
ing feet. The preferred mounting orientation is with the pressure ports facing down.
Fig 4
Mounting Hole Pattern
Note: BAPI recommends using #10
screws that require 5/32" pilot holes.
Fig. 5
Mounting over a 2x4 Junction Box
Screwdriver
#10 Screws
Sealant Filled Connectors
Drill with 5/32” bit
Wire
*
1 of 3
Fig. 3
Display ZPS in a BAPI-Box
Back Mount, Cover Open
Tools & Material List
