1
OPERATION MANUAL OF TPMS SENSOR
MODEL: TMSS6A3
Thank you for choosing our TPMS. This guide instructs the technician how to properly
mount and dismount a Baolong Huf TPMS snap-in sensor.
Introduction of TMSS6A3
TMSS6A3 is the transmitting module in TPMS. Its working frequency is 315MHz;
Receiver Low frequency
：
125KHz; supply:Battery;Radio frequency uses the FSK
modulation and Machester encoding mode;Antenna type:Monopole antenna,antenna
Gain:-3.7dB~-3.4dB;cable loss
：
3.12dB.The communication mode between WARDKS and
receiving module is RF wireless communication. The module detects pressure and
temperature inner the tire periodically and sends these information via RF output circuit to
the receiving module. One can manually detect data inner tire by LF wake-up tools. Install it
on the rim together with cycle valve.
PART ONE MOUNTING AND DISMOUNTING OF TRANSMITTER
1. Mounting of Transmitter
1.1 Identify Transmitter
Check whether the prepared sensor is the same with the image below.
Note: Only plastic or aluminum caps, aluminum valves and nickel plated valve cores can be
used when replaced.
①
Self -lock
Screw
②
Electronal Module
