12.7.-
TOT(TRANSMISSION TIMER):
This function can automatically control the time we transmit each time you press [PTT] on the transceiver. This
feature is very useful to avoid overheating excessive power transistors of the transceiver. The transceiver will be
off transmission automatically once the set time.
12.8.-CTCSS/DCS:
In some cases only tant to establish communicatons in a closed user group at a partcular frequency or
channel, for it till use "CTCSS" or code "DCS" for recepton.
The "squelch" opens only then receiaing a frequency tith "CTCSS" or codes "DCS" same as the
programmed in your transceiaer. If codes of the receiaed signal difers from those programmed in your
transceiaer, the "squelch" till not open and the receiaed signal can be heard.
Note:
- The use of "CTCSS" or "DCS" in a communication, does not guarantee complete confidentiality
communication.
12.9.-
ANI
-ANI (Automatc Number Identicaton) is also knotn as PTT ID because an ID is transmited then the PTT
buton of the radio is pressed and/or released. This ID tells the dispatcher thich ield radio tas keyed.
Only could be set by PC softare.
12.10.- DTMFST (DTMF TONE OF TRANSMITTING CODE ):
First you should set the PTT-ID as BOT/EOT/BOTH
-“OFF”—Under transmitting mode, you can’t hear the DTMF tone, while you press the key to transmit
the code or code automatically transmitted.
-“DT-ST”—Under transmitting mode, you can hear the DTMF tone, while you press the key to transmit
the code.
-“ANI-ST”—under transmitting mode, you can hear the DTMF tone, while the code automatically
transmitted.
-“DT-ANI”—under transmitting mode, you can hear the DTMF tone, while you press the key to
transmit the code or the code automatically transmitted.
12.11.- SC-REV(SCAN RESUME METHOD):
This transceiaer allots you to scan memory channels, all the bands or part of the bands.
When the transceiaer detects a communicaton, the scan till stop automatcally.
