4)
VOX(Voice operated transmission)
OFF/0-10
5
W/N( Wideband/narrotband)
WIDE/NARR
6
ABR(Display illuminaton)
OFF/1/2/3/4)/5s
7
TDR(Dual tatch/dual recepton)
OFF/ON
8
BEEP(Keypad beep)
OFF/ON
9
TOT(
Transmission timer)
15/30/4)5/60.../585/600seconds
10
R-DCS(Recepton digital coded squelch)
OFF/D023N...D754)I
11
R-CTS(Recepton Contnuous Tone Coded Squelch)
67.0Hz...254).1Hz
12
T-DCS(Transmission digital coded squelch)
OFF/D023N...D754)I
13
T-CTS(Transmission Contnuous Tone Coded Squelch)
67.0Hz...254).1Hz
14)
VOICE(Voice prompt)
OFF/ON
15
ANI(Automatc number identicaton of the radio,only can be set by
PC softare.
16
DTMFST(The DTMF tone of transmitng code.)
OFF/DT-ST/ANI-ST/DT+ANI
17
S-CODE(Signal code, only could be set by PC softare.)
1,…,15 groups
18
SC-REV(Scan resume method)
TO/CO/SE
19
PTT-ID(press or release the PTT buton to transmit the signal code)
OFF/BOT/EOT/BOTH
20
PTT-LT(delay the signal code sending)
0,…,30ms
21
MDF-A(under channel mode, A channel displays. Note:name display
only can be set by PC softare.
FREQ/CH/NAME
22
MDF-B(under channel mode, B channel displays. Note:name display
only can be set by PC softare.
FREQ/CH/NAME
23
BCL(busy channel lockout)
OFF/ON
24)
AUTOLK(keypad locked automatcally)
OFF/ON
25
SFT-D(directon of frequency shif)
OFF/+/-
26
OFFSET(frequency shif)
00.000…69.990
27
MEMCH(stored in memory channels)
000,…127
28
DELCH(delete the memory channes)
000,…127
29
WT-LED(illuminaton display color of standby)
OFF/BLUE/ORANGE/PURPLE
30
RX-LED(illuminaton display color of recepton)
OFF/BLUE/ORANGE/PURPLE
31
TX-LED(illuminaton display color of transmitng)
OFF/BLUE/ORANGE/PURPLE
32
AL-MOD(alarm mode)
SITE/TONE/CODE
33
BAND(band selecton)
VHF/UHF
34)
TX-AB(transmitng selecton thile i
n dual tatch/ recepton)
OFF/A/B
35
STE(Tail Tone Eliminaton)
OFF/ON
36
RP_STE
(Tail tone eliminaton in communicaton through repeater)
OFF/1,2,3…10
37
RPT_RL(Delay the tail tone of repeater)
OFF/1,2,3…10
38
PONMGS(Boot display)
FULL/MGS
39
ROGER(tone end of transmission)
ON/OFF
4)0
RESET (Restore to default setng)
VFO/ALL
12.2.-SHORTCUT MENU OPERATION:
1.-Press the key MENU,then press the key or to select the desired menu.
▲
▼
2.-Press the key MENU again, come to the parameter setng.
3.-Press the key or to select the desired parameter.
▲
▼
