Instruction Manual
Expert
™
Coaxial Polarized Retroreflective Sensor for Clear Object Detection
•
Reliably detects clear, translucent, or opaque objects — including PET, glass
containers, and transparent films
•
Coaxial optics enable reliable detection of targets to the face of the sensor with
no dead zone
•
"Clear Tracking" automatic compensation algorithm provides long and reliable
operation by compensating for dust build up and ambient temperature changes
•
Fast response speed with low jitter for high speed bottling and packaging
applications
•
Bright, visible red light spot makes alignment easy
•
3 user-selectable thresholds optimize performance to the type of object being
detected
•
Easy configuration of sensor by remote teach input or tactile push button
•
Convenient mounting options available for 18 mm barrel or side mount
•
Bright indicator LEDs show operating status from 360˚
•
IP67 rated ABS housing
•
Dedicated PNP or NPN output with matching remote input wire
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury or
death. This device does not include the self-checking redundant circuitry necessary to allow its use in
personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized
sensor output condition.
Models
Models
Mode
Range
Output
Connector
1
QS18EN6XLPC
COAXIAL
POLAR RETRO
CLEAR OBJECT
P
0 to 1.3 m (0 to 4.2 ft) on BRT-40X19A
0 to 2.0 m (0 to 6.5 ft) on BRT-51X51BM
0 to 3.0 m (0 to 9.8 ft) on BRT-92X92C
NPN
2 m cable (6.5 ft)
QS18EP6XLPC
PNP
1
The standard 2 m (6.5 ft) cable models are listed.
•
To order the 9 m (30 ft) cable models, add the suffix "W/30" to the cabled model number (for example QS18EN6XLPC W/30)
•
To order the 4 pin Euro M12 integral connector, add the suffix "Q8" (for example QS18EN6LPCQ8)
•
To order the 4 pin Euro M12 150 mm (6 inch) cable, add the suffix "Q5" (for example QS18EN6LPCQ5)
•
To order a 4 pin Pico M8 integral connector, add the suffix "Q7" (for example QS18EN6LPCQ7)
•
To order a 4 pin Pico M8 150 mm (6 inch) cable, add the suffix "Q" (for example QS18EN6XLPCQ)
WORLD-BEAM QS18E Clear Object Detection
Original Document
194469 Rev. C
13 August 2018
194469
