Banner WLS27..0285 Series, Быстрый старт

Страница: 1 / 2

Quick Start Guide
This guide is designed to help you set up and install the WLS27 Multicolor LED Strip Light. For complete information on programming, performance,
troubleshooting, dimensions, and accessories, please refer to the Instruction Manual at
www.bannerengineering.com
. Search for p/n 201896 to view
the Instruction Manual. Use of this document assumes familiarity with pertinent industry standards and practices.
Models
WLS27
Connector Window
Lighted
Length (mm)
Colors 1-5 and Control Cascadable Family
C = Cascadable
X = Non-cascadable
WGRXX3 = White, Green, Red with override control
WYRXX3 = White, Yellow, Red with override control
GYRXX3 = Green, Yellow, Red with override control
WGRYB5 = White, Green, Red, Yellow, Blue with binary control
WGRXX6 = White, Green, Red with I/O Block control
WYRXX6 = White, Yellow, Red with I/O Block control
GYRXX6 = Green, Yellow, Red with I/O Block control
0285
0570
0850
1130
D = Diffused
Q = Integral 4-pin M12 QD
(mating cordset required)
X WGRXX3 0285 D Q
Construction
S
S = Sealed
Voltage
24
24 = 24V dc
H = Heavy Diffused
Wiring Diagrams
Male
1
4
3
2
Female
2
3
4
1
Key
Pin 1 Brown: Input 1
Pin 2 White: Input 3
Pin 3 Blue: DC Common
Pin 4 Black: Input 2
3 Color Override Control (Color 3 overrides Colors 1 and 2, Color 2 overrides Color 1)
Input 1: Pin 1
Brown Wire
Input 2: Pin 4 Black
Wire
Input 3: Pin 2 White
Wire
LED Color
— — — Light OFF
+24 V dc — — Color 1 ON
— +24 V dc — Color 2 ON
+24 V dc +24 V dc — Color 2 ON
— — +24 V dc Color 3 ON
+24 V dc — +24 V dc Color 3 ON
— +24 V dc +24 V dc Color 3 ON
+24 V dc +24 V dc +24 V dc Color 3 ON
5 Color Binary Control (Binary input state controls color)
Input 1: Pin 1
Brown Wire
Input 2: Pin 4
Black Wire
Input 3: Pin 2
White Wire
LED Color
— — — Light OFF
+24 V dc — — Color 1 ON
— +24 V dc — Color 2 ON
— — +24 V dc Color 3 ON
+24 V dc +24 V dc — Color 4 ON
+24 V dc — +24 V dc Color 5 ON
— +24 V dc +24 V dc Light OFF
+24 V dc +24 V dc +24 V dc Light OFF
3 Color I/O Block Control (Input 1 is always ON through the block)
Input 1: Pin 1 Brown Wire Input 2: Pin 4 Black Wire Input 3: Pin 2 White Wire LED Color
+24 V dc — — Light OFF
+24 V dc +24 V dc — Color 1 ON
+24 V dc — +24 V dc Color 2 ON
+24 V dc +24 V dc +24 V dc Color 3 ON
WLS27 Multicolor LED Strip Light with EZ-
STATUS
™
Original Document
201895 Rev. C
18 June 2018
201895