Set an
Inspection
to Begin at Startup
Note: Only one
inspection
can begin at startup.
1. On the
Inspection
Management screen, click Manage.
2.
Locate the desired
inspection
and click
.
The
turns green and the
inspection
will begin at the next startup.
6.4.2 Transfer
Use Transfer to transfer
inspections
between a connected sensor and a computer, network drive, or storage device.
Figure 35. Transfer
Click
to navigate to and select a
different
folder. Click
to open the folder to view the
files.
Save an
Inspection
to a Computer, Network Drive, or Storage Device
Vision Manager
automatically
saves
inspections
to the VE as they are created and
modified.
Save a copy of the
inspection
to your
computer or another network
location
if you want to be able to go back to previous
settings.
Use the following procedure to save a copy of an
inspection
to your computer or a network
location.
1. On the
Inspection
Management screen, click Transfer.
Figure 36. Transfer
2. Change the
destination
folder, if desired.
a) Click above the right column.
An explorer window opens.
b) Navigate to the desired
location,
network
location,
or storage device.
c) Click Select Folder.
The folder is selected and the window closes.
The path to the
location
displays above the right column.
3. Select the desired
inspection
from the
inspection
list in the
left
column.
4. Click .
Inspection
name.idb displays in the right column and the
inspection
is transferred (saved) to the selected
location.
VE Series Smart Camera
www.bannerengineering.com - Tel: 763.544.3164
33