Banner SureCross Performance GatewayPro Series, Руководство пользователя, Страница: 6 / 8

N7 - Read Registers N14 - Write Registers
… … … …
226 Input 227 226 Output 227
227 Input 228 227 Output 228
Logging into the Web Configurator
The SureCross ® Pro and DX83 Ethernet Bridge devices use an XML file to configure the network. To access the XML file, use any web
browser set up for a direct connection to the Internet. If problems occur while connecting, verify the browser is not set to use a proxy
server.
When connecting to the Ethernet Bridge, GatewayPro, or MultiHop Pro directly from a host computer, a crossover Ethernet cable is
required; when connecting through a switch or Ethernet hub, use a standard Ethernet cable.
• The factory default IP address for the devices is: 192.168.0.1.
To change the device’s default IP address, first set up the host PC with an IP address different from the Ethernet Bridge, GatewayPro, or
MultiHop Pro IP addresses. (Please refer to Banner document 133116 for detailed instructions on setting up the host computer’s network
IP address.) After changing the host’s IP address, open a web browser and log into the Ethernet Bridge, GatewayPro, or MultiHop Pro by
typing the IP address in the browser location window: http://192.168.0.1.
After entering the IP address, the home web page for the SureCross device displays. To log in, click on any tab at the top of the page. To
log out, close the browser.
Admin-level access allows administrators to set up system users and their passwords. Admin-level access is also required to change the
IP address of the system. For Admin-level access, enter the following as the user name and password:
• User name: root
• Password: sxi
For user-level access, enter the following as the user name and password.
• User name: system
• Password: admin
Mixing Performance and Non-Performance Radios in the Same Network
To comply with federal regulations, the 150 mW radios and 1 Watt radios communicate differently. To mix Performance radios with non-
Performance radios:
• Performance radios must operate in 250 mW mode, not 1 Watt mode (DIP switch 1 ON)
• Non-Performance radios must be set to use Extended Address Mode (DIP switch 1 ON)
SureCross Performance GatewayPro
6 www.bannerengineering.com - tel: 763-544-3164 P/N 157639 Rev. B