Item
Model No.
Description
1
BWA-SOLAR-001
FlexPower Solar Supply, includes panel, solar controller, rechargeable batteries, and
mounting materials
2
DX80DR*M
Data radio, 900MHz or 2.4GHz
3
DX80N9X2S2N2M2
FlexPower Node, 900MHz, Boost Power, 2 discrete IN, 2 NMOS discrete OUT, 2 ana-
log IN (2.4GHz also available)
4
QT50U-75390
U-GAGE Long range ultra-sonic sensor, low power consumption
5
MQDC1-501.5
Cable, RS-485 quick disconnect, 5-pin Euro, straight, 0.5 m*
6
DX80N...
FlexPower Node or 10 to 30V dc Node
7
CSRB-M1250M125.47M125.73
Cable, RS-485, quick disconnect, 5-pin Euro, male trunk, female branches, black*
8
DX80G*M2S
FlexPower Gateway, Serial RS485 Interface, No I/O
* For RS-232 communications, an RS-232 crossover cable must be used between the RS-485 and the data radio or Gateway.
Cables may be either yellow or black. Black is shown here for clarity.
Parallel Solar Systems
Two or more solar systems can be directly ORed together using a splitter cable. Using the Solar Supply in parallel provides a modular
approach to incrementally increase the capacity in some challenging applications or locations.
2
3
1
Item
Model No.
Description
1
BWA-SOLAR-001
FlexPower Solar Supply, includes panel, solar controller, rechargeable batteries, and
mounting materials
2
DX80N...
FlexPower Node or 10 to 30V dc Node
3
Power Splitter Cable, quick disconnect, 5-pin Euro, female trunk, male branches
Battery Backup Feature
The DX81P6 6-Pack Battery Supply Module can operate as a power backup for the FlexPower Solar Supply when the units are connec-
ted using the splitter cable..
The FlexPower Solar Supply can be ORed with the DX81P6 Battery Supply Module using the CSRB-M1253.28M1253.28M1253.28 split-
ter cable. When the solar panel temporarily disconnects the load because of a lack of sunlight, the DX81P6 Battery Supply Module sup-
ports the system and powers the load. This battery backup can support a sensor system consisting of a 2-wire transmitter powered
continuously with 15V at 20 mA and a DX80 Node transmitting once per second for up to 30 days.
Optional mapping allows a battery backup function to be mapped to a wireless error output to determine if the devices are powered by
the solar panel assembly or the battery supply module.
SureCross Wireless I/O Network Manual
80
www.bannerengineering.com - tel: 763-544-3164
rev. I
