Installing Your SureCross® Radios
The following are some recommendations for installing your wireless network components.
Mounting SureCross Devices Outdoors
Use a Secondary Enclosure
For most outdoor applications, we recommend installing your SureCross devices inside a secondary enclosure. For a list of available
enclosures, refer to the Accessories list.
Point Away From Direct Sunlight
When you are not using a secondary enclosure, minimize the damaging effects of ultra-violet radiation by mounting the devices to avoid
facing intense direct sunlight.
• Mount under an overhang or other source of shade,
• Install indoors, or
• Face the devices north when installing outside.
For harsh outdoor applications, consider installing your radio inside a secondary enclosure. For a list of available enclosures, refer to the
Accessories list.
Avoid Collecting Rain
Mount Vertically to Avoid Collecting Rain. When possible, mount the devices where rain or snow will drain away from the device.
• Mount vertically so that precipitation, dust, and dirt do not accumulate on permeable surfaces.
• Avoid mounting the devices on flat or concave surfaces, especially if the display will be pointing up.
rev. I
www.bannerengineering.com - tel: 763-544-3164
31
