System Layouts
Because of the flexibility of the DX80 wireless devices, many different configurations using Gateways, Nodes, GatewayPros, Ethernet
Bridges, Modbus slave devices, data radios, data radio repeaters, and/or solar powered systems are possible, both as stand-alone sys-
tems and host-connected systems.
DX83 Ethernet Bridge
DX80 Gateway, 900 MHz
DX80DR9M-H MultiHop Radio
Stand-Alone Systems
Mapped Pairs (DX70)
In this system, a DX70 pair is used to map I/O in a simple one-to-one configuration. Inputs on one DX70 is mapped to the outputs of the
other device. DX70 kits are configured at the factory and require no additional set up by the user.
Item
Model No.
Description
1
DX70G...
DX70 Gateway
2
DX70N...
DX70 Node
Gateway with Multiple Nodes (DX80)
In this configuration, the Gateway is the master of the wireless network.
This network may be configured using the User Configuration Tool (UCT) and RS-485 to USB adapter cable. The UCT is used to map
inputs and outputs between Nodes and Gateways.
rev. I
www.bannerengineering.com - tel: 763-544-3164
59
