Use an N-Type, Pole-Mounted Antenna
This antenna mounts remotely from the box, with the SureCross device mounted inside the box.
Ground the surge suppressor and antenna. Keep the ground wire as short as possible and make all ground connections to a
single-point ground system to ensure no ground loops are created.
1
3
4
5, 6
2
7, 8
9
1. N-type Yagi antenna
2. N-Type to N-Type antenna cable
3. Surge suppressor
4. RP-SMA to N-Type male antenna
cable
5 and 6. DIN rail and DIN rail bracket
7and 8. Enclosure and enclosure
cover/plate, etc
9. Power supply
Directional (Yagi) Antennas with an N-Type Female Connection
BWA-9Y6-A
•
6.5 dBd, 6.8 × 13 inches Outdoor,
900 MHz
•
BWA-9Y10-A
•
10 dBd, 6.8 × 24 inches Outdoor,
900 MHz
•
Omni-Directional Fiberglass Antennas with N-Type Female Connections
BWA-9O6-A
•
6 dBd, Fiberglass, Full wave, 71.5
inches, 900 MHz
•
BWA-2O8-A
•
8.5 dBi, Fiberglass, 24 inches, 2.4
GHz
•
BWA-2O6-A
•
6 dBi, Fiberglass, 16 inches
(shown), 2.4 GHz
•
BWA-9O6-AS
•
6 dBi, Fiberglass, 1/4 Wave, 23.6
inches (1.3 inch dia.), 900 MHz
•
BWA-9O8-AS
•
8 dBi, Fiberglass, 3/4 Wave, 63
inches (1.5 inch dia.), 900 MHz
•
Use the LMR400 cables to connect the surge suppressor to the antenna.
Installing Your Sure Cross
®
Radios
6
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 151514 Rev. D
