Banner Sure Cross DXM1000-B Series страница 68 Скачать руководство пользователя

Страница: 68 / 73

•

Additional technical notes and videos

For more information about the DXM700 family of products, including technical notes, configuration examples, and

ScriptBasic program examples, please refer to the Banner website:

www.bannerengineering.com

11.5 DXM700 Support Policy

The DXM Wireless Controllers are industrial wireless controllers that facilitate Industrial Internet of Things (IIoT) applications.

As a communications gateway, it interfaces local serial ports, local I/O ports, and local ISM radio devices to the Internet using

either a cellular connection or a wired Ethernet network connection. In a continuing effort to provide the best operation for the

DXM700, stay connected with Banner Engineering Corp to hear about the latest updates through the Banner website. Create

a login today to stay informed of all Banner product releases.

11.5.1 Firmware Updates

The DXM700 has been designed to be a robust and secure IOT device. To provide the most reliable and secure device

possible, periodic firmware updates are released to enhance and expand the capabilities of the DXM700. Firmware updates

and description details are found on the Banner website. Customers with critical update requirements will get access to pre-

released firmware from the factory.

11.5.2 Website Information

The Banner website is the main method of disseminating DXM700 information to customers. The data found on the website

include:

•

DXM instruction manuals

•

Configuration manuals

•

Firmware downloads

•

Firmware release notes

•

Errata data, any known issues with a release of firmware

•

Possible work-around solutions for known issues

•

DXM Solutions Guides

11.5.3 Feature Requests

Our customer is our most valuable resource to improve our DXM700. If you have suggestions for improvements to the

DXM700 or configuration tools, please contact Banner Engineering Corp.

11.5.4 Potential DXM Issues

Potential issues with the DXM700 are collected from Banner's support engineers to provide solutions. Users can get help

from the website documentation or by calling Banner Engineering for support help. Solutions are as simple as configuration

adjustments, work-around configuration solutions, or potential new firmware updates.

11.5.5 DXM Security

The DXM700 was designed to collect local wireless sensor data, local sensor data, provide simple control, and send the data

to the cloud.
The DXM700 does not run a Linux or Windows based operating system but an embedded real-time operating system

(RTOS) environment. As a proprietary operating system, the security aspects are easier to manage and minimize.
Security updates are released through the Banner Engineering Corp website (

www.bannerengineering.com

) and New

Product Release Announcements (

NPRA

11.6 Contact Us

Banner Engineering Corp. headquarters is located at:

9714 Tenth Avenue North

Minneapolis, MN 55441, USA

Phone: + 1 888 373 6767

For worldwide locations and local representatives, visit

www.bannerengineering.com

Sure Cross

DXM700-Bx Wireless Controller

www.bannerengineering.com - Tel: + 1 888 373 6767

Содержание Sure Cross DXM1000-B Series









































































Результаты поиска

Содержание Sure Cross DXM1000-B Series

Отзывы:

Похожие инструкции для Sure Cross DXM1000-B Series

Бренды по названию

Популярные бренды

Banner Sure Cross DXM1000-B Series, Инструкция по эксплуатации

Результаты поиска

Содержание Sure Cross DXM1000-B Series

Отзывы:

Похожие инструкции для Sure Cross DXM1000-B Series

Бренды по названию

Популярные бренды