Banner Sure Cross DXM100-B Series Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 121

Banner Sure Cross DXM100-B Series Скачать руководство пользователя страница 57

After entering the user name and password, click on

Send SMTP Password

to save the user name and password to the

DXM. The DXM must be connected to the PC to complete this operation. If successful, a pop-up window appears, asking to

reboot the device. Select

Yes

to reboot the device.

8.5.4 Controller Configuration Authentication

The DXM can be programmed to allow changes to the configuration files only with proper authentication by setting up a

password on the

Settings

>

Administration

screen in the DXM Configuration Software.

With the DXM connected to the PC, click

Get Device Status

. The DXM status displays next to the button.

Figure 37. Settings > Administration screen

Use the DXM Configuration Software to:

•

Set the Admin Password

•

Change the Admin Password

•

Remove the Admin Password

To change or remove an admin password, the current password must be supplied. The DXM must be connected to the PC to

change the administration password.
The DXM can be unlocked without knowing the administration password, but doing this erases the configuration program,

logging files, and any ScriptBasic program on the device. For instruction on how to do this, see the

Additional Information

p. 65 section.

8.6 EtherNet/IP

™

Configuration

The DXM is defined from the factory to send/receive register data from the Gateway and the first 16 Nodes with an

EtherNet/IP

™

5

host.

To expand the number devices going to Ethernet/IP, change the

Devices in system

parameter in the DX80 Gateway

(default setting is 8) to 32. To change this value:

1. Launch the the DX80 Configuration Software.
2. In the menu bar, go to

Device

>

Connection Settings

and select

Serial

or

Ethernet DXM

.

3. In the

Configuration

>

Device Configuration

screen, click on the arrow next to the Gateway to expand and display

the Gateway's parameters.

4. In the

System

section, use the

Devices in system

drop-down list to make your selection.

This allows the user to maximize the use of the EtherNet/IP buffer to 28 devices.
EDS (Electronic Data Sheet) files allow users of the EtherNet/IP protocol to easily add a Banner DXM device to the PLC.

Download the EDS files from the Banner website.

•

DXM EDS Configuration File (for PLCs) (p/n

•

DXM EIP Config File for DXM Controller with Internal Gateway (Models: DXM1xx-BxR1, DXM1xx-BxR3, and

DXM1xx-BxCxR1) (p/n

)

8.6.1 Download an Existing Configuration from the DXM

If you have an existing configuration file, save the XML file locally as a back-up on your computer.

1. Apply power to the DXM.
2. Connect an ethernet or USB cable between your computer and the DXM.
3. Launch the DXM Configuration Software v4 and select your DXM model.

5

EttherNet/IP is a trademark of Rockwell Automation.

Sure Cross

®

DXM100-Bx and DXM1000-Bx Wireless Controllers

www.bannerengineering.com - Tel: + 1 888 373 6767

57

«
...
55
56
57
58
59
...
»

Содержание Sure Cross DXM100-B Series


























































































































Отзывы:

Нет отзывов