Install the smart lock
Install the deadbolt
Deadbolt
Strike screws
(M4*0.8 in)
Screwdriver
① Measure the distance between the hole center to the door edge
(2'' / 60 mm or 2¾'' / 70 mm).
② If the distance between the hole center to the door edge is 2'' /
60 mm, please use the provided lock bolt for installation. If the
distance between the hole center to the door edge is 2¾'' / 70 mm,
adjust the deadbolt to 70mm until the bolt locks into place.
③ Insert the door bolt into the door frame, make sure the word
"UP" is facing up, and it is indicated on the lock bolt.
④ Screw the door bolt into the door frame with a screwdriver (not
provided).Items required: deadbolt, deadbolt screws, screwdriver
(not provided) - schematic diagram, operation diagram.
2-3/8
2-3/4
180°
Install the strike plate
If it is confirmed that the bumper plate (strike plate) used by the
lock bolt on the existing door frame can be extended and retracted
smoothly, you can skip this step without installing the strike plate
in the accessories package.
TOP
Upward
Strike Plate
Strike Reinforcer
(optional)
Strike screws
(M4*0.8 in)
①
Align the bumper plate (strike plate) and the strike plate buckle
box with the center hole of the lock bolt.
② Put the strike plate buckle box into the door hole. Putting this
accessory is for the sake of appearance and to avoid dust in the
door hole being brought into the cylinder by the lock bolt, which will
affect the life of the cylinder.
③ The strike plate covers the buckle box, and the strike plate is
fixed with screws. Make sure the strike plate is placed in the
correct position and direction.
Screwdriver
①
Attach the black silicone pad to the back of the front lock (it has
been attached at the factory, please ignore this step).
② If the diameter of the door hole is 2"/54mm, please use the
provided spacer to secure the smart lock.
③ If the diameter of the transverse hole is 1½'' / 38 mm, please
remove the spacer.
④ Align the tail teeth of the cylinder with the center hole of the
lock bolt and insert it into the center hole.
⑤ Pass the wire connected to the front lock from under the electric
lock into the door.
Install the front lock part
1.Attach the black silicone pad to the mounting plate (it has been
attached at the factory, please ignore this step).
2.Pass the front lock wire through the hole in the mounting plate.
3.Secure the mounting plate to the inner door frame with the
mounting plate plate screws. Please confirm the door thickness,
use the corresponding screws, cylinder fixing 1.8 inch
screws(schematic diagram “J”) for door thickness of 35-45mm or
cylinder fixing 2.2 inch screws (schematic diagram “J”) for door
thickness of 35-55mm, make sure the screws pass through the
holes of the lock bolt and the mounting plate, and lock them in
place.
4.In order to secure the lock to the door, please use additional
auxiliary fixing screws (schematic diagram “I”), and drill according
to the drilling diagram (if you do not want to drill holes to damage
the smart lock, this step can be omitted).
Install the mounting plate
Mounting Plate
Mounting Plate Screw
(M5*1.8 in/2.2 in)
Screwdriver
Connection column
screw (M4*1.5 in)
this step can be
omitted
04
05
06
