MINI-SCREEN Controller Models
MSDINT-1 and MSDINT-1L2
Supplement to MINI-SCREEN Instruction Manual 44895
Printed in USA
04/00
P/N 62875
Figure 20. MINI-SCREEN System electrical connections.
MODEL NO.
MSDINT-1 or 1L2
1 2 3 OK
STEADY
FLASHING
Blocked or Latched
Clear
Reset
Lockout
Blanking
Alignment
BANNER ENGINEERING CORP., USA
(612) 544-3164
For control reliable
operation always follow the
instructions in the manual.
Shock hazard may exist.
Diagnostic
Chart on
Reverse Side
CAUTION
MINI-SCREEN
LISTED
Presence
Sensing
Device
10Y8
0466
!
WARNING
18
SSD
AUX
or
ALARM
19
1
2
22
FSD2
23
Key 1 Key 2
8
9
27
FSD1
28
+24
V dc
dc
Com
PE
32
33 34
Test 1
or
LATCH
RESET 1
Test 2
or
LATCH
RESET 2
4
5
+12V
dc
COM T/R T/R DRAIN
13
14 15
16
17
Figure 17. Control Module Dimensions and Mounting Hole Locations.
83.8 mm
(3.30")
110.0 mm
(4.33")
100.0 mm
(3.94 ")
Combo Head (Phillips/Slotted) Screws
M3.5 x 0.6 mm x 14 mm (2) (#6 x 0.5" equivalent) (Supplied)
M3.5 mm Washers (2) (#6 equivalent) (Supplied)
M3.5 mm x 0.6 mm Nuts (2) (36 equivalent) (Supplied)
Recommended torque is 16 in-lbs on mounting screws
Slot for Screws (2)
M3.5 x 0.6 mm (2)
35.0 mm
(1.38")
DIN Mounting Slot
DIN Mounting Tab
(Supplied)
60.8 mm
(2.40")
85.3mm
(3.36")
7.4 mm
(0.29")
7.1 mm
(0.28")
The enclosed MINI-SCREEN controller
MSDINT-1, MSDINT-1L2, or replacement
board reflect the new MINI-SCREEN DIN
controller design. These controllers are
identical to the old MINI-SCREEN DIN
controller, except that they have
removeable wiring blocks. With the
removeable wiring blocks, wiring terminal
numbers change and one overall
controller dimension increases. This
supplement modifies the information for
figures 17, 20, and 23, which appear in
MINI-SCREEN manual 44895.
