Banner LTF, Инструкция по эксплуатации

Страница: 35 / 60

June 22, 2023
LTF Time Of Flight Laser Distance Sensor Instruction Manual
35
•
Input Menu map
MENU INPUT
or
or
Go Back to Parent Menu
Select Menu Item
Press to Save Setting
INPUT Active
INPUT Type
Active High
Active Low
Type LasrEnbl
Type Teach
Type Trigger
Type SyncMstr
Type SyncSlve
Type Disabled
Input Type
The Type option sets the input type.
Navigate : MENU › INPUT › Type
Remote Input : Not available
Default: Disabled
Input Type Description
Teach The remote input is used to TEACH and program the sensor.
LasrEnbl The remote input is used to control when the laser emitter is On/Off.
Trigger
The remote input is used to trigger advanced measurements To enable advanced measurements, the In-
put Type option must be set to Trigger (see
Key definition for "{keyrefName}" not found in the DITA map. ).
SyncMstr
The remote input is used as the Master Sync output to an attached Slave sensor (see Key definition for
"{keyrefName}" not found in the DITA map. ).
SyncSlve
The remote input is used as the Slave Sync input from an attached Master sensor (see Key definition for
"{keyrefName}" not found in the DITA map. ).
Disabled The remote input is disabled. (Default)
Input Active
The Active option sets the active state of the remote input. Use the Active options to change the active input to Low or High.
Navigate : MENU › INPUT › Active
Remote Input : Not available
Default : Low
Input Active Description
Low The remote input detects low (0 V) inputs and high-to-low transitions. (Default)
High The remote input detects high (V+) inputs and low-to-high transitions.
Measure Menu (MEASURE)
Use this menu to view or change the:
Speed
© Banner Engineering Corp.