Banner L-GAGE LH Series, Инструкция по эксплуатации

Страница: 5 / 19

TARGET
Measurement
Range Reference
Start of Measurement
Range
Reference
Distance
End of
Measurement
Range
LH Series
Sensor
Displacement Measurement Installation Tips
Target motion must be perpendicular to emitter/receiver axis.
Some targets (those with a stepped plane facing the sensor, a boundary line, or rounded targets) pose specific problems for sensing
distances. For such applications, see below for suggested mounting orientations.
Height-difference By a Wall Moving Target
Correct Incorrect Correct Incorrect Correct Incorrect
A
B
A
B
A B
A
B
A B
A B
Border of different luster or color Displacement in a hole
Correct Incorrect Correct Incorrect
A B
A B A B
A B
2.2.2 Thickness Delta Measurement Installation
For thickness delta measurement using two sensors, the "master/slave separation" is significant instead of the "middle of range" that is
significant when measuring displacement. It is frequently necessary to measure materials whose thickness lies in a particular range. In
such cases you should increase the distance apart by the nominal thickness of the material that is being measured.
The factory defaults for a thickness delta measurement are as follows:
Model Default Nominal Thickness Ideal Master/Slave Separation
LH30 5 mm 65 mm
LH80 20 mm 180 mm
L-GAGE
®
LH Series Sensor
www.bannerengineering.com - Tel: 763.544.3164 5