Main Menu > System > Display Settings
Fail Hold Time
The Fail Hold Time determines how long a failed image is displayed on the LCD so that you can see what failed. The sensor will continue
to process any triggers and the inspection will continue normally. This time delay is just for the screen. You can set this parameter from 0
to 3600 seconds using the slider at the bottom of the screen.
Main Menu > System > Display Settings > Fail Hold Time
LCD Timeout
The LCD screen dims after a user-selectable period when it is not being used. Use the arrow keys or slide the bar at the bottom of the
screen to set the LCD screen time out.
NOTE: This screen is not available on the Emulator.
Main Menu > System > Display Settings > LCD Timeout
Touch Calibration
Touchscreen Calibration may be necessary if the software does not correctly respond when an icon on the screen is pressed. The cali-
bration routine aligns the touch screen's coordinates to the display behind it. Be sure to follow the prompts on the screen when executing
the Touchscreen Calibration function.
iVu Series Image Sensor
24
www.bannerengineering.com - tel: 763-544-3164
Rev. E
