Configurable FlexPower MultiHop radio module with discrete and analog I/O
SureCross
®
MultiHop embeddable board devices were specifically designed for the
needs of industrial users to provide connectivity where traditional wired connections are
not possible or cost prohibitive.
• Wireless industrial module with two sinking discrete inputs, two NMOS discrete out-
puts, two 0 to 20 mA analog inputs, and two switch power outputs
• Selectable transmit power levels of 250 mW or 1 Watt and license-free operation up to
4 watt EIRP, with a high-gain antenna, in the U.S. and Canada for 900 MHz
• FlexPower
®
power options allows for +10 to 30V dc, solar, and battery power sources
for low power applications.
• Self-healing, auto-routing RF network with multiple hops extends the network’s range
• Serial and I/O communication on a Modbus platform
• Message routing improves link performance
• DIP switches select operational modes: master, repeater, or slave
• Switched power outputs provide 5 to 24V dc power to external sensors
• FHSS radios operate and synchronize automatically; selectable network IDs reduce
interference from collocated networks
For additional information, the most recent version of all documentation, and a complete list of accessories, refer to Banner Engineering's
website,
www.bannerengineering.com/surecross
Models
Power
Frequency
Transmit Power
I/O
DX80DR9M-HB1
10 to 30V dc or 3.6
to 5.5V dc low pow-
er option
900 MHz ISM
Band
250 mW or 1 Watt (DIP
switch selectable)
Inputs: Two sinking discrete, two 0 to 20 mA
analog
Outputs: Two NMOS discrete
Switch Power Outputs: Two
DX80DR2M-HB1
2.4 GHz ISM
Band
63 mW (100 mW EIRP)
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to serious
injury or death. This device does NOT include the self-checking redundant circuitry necessary to allow its
use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-
energized sensor output condition.
CAUTION: Electrostatic Discharge (ESD)
ESD Sensitive Device. Use proper handing procedures to prevent ESD damage to these devices. The
module does not contain any specific ESD protection beyond the structures contained in its integrated cir-
cuits. Proper handling procedures should include leaving devices in their anti-static packaging until ready
for use; wearing anit-static wrist straps; and assembling units on a grounded, static-dissipative surface.
CAUTION: Never Operate 1 Watt Radios Without Antennas
To avoid damaging the radio circuitry, never power up SureCross Performance or SureCross MultiHop (1
Watt) radios without an antenna.
SureCross MultiHop Data Radio Module
P/N 154365 Rev. C
2/27/2013
0 154365
0
