1.Installing the Hook
1.1
Mark your selected place of
installation. (Figure 1)
1.2
Remove the pencil spindle from
the hook by loosening the grub screw.
(Figure 2)
1.3
Drill appropriate sized pilot
hole for the wood screw at your
selected install point.
1.4
Fit pencil spindle using wood
screw provided. (Figure 3)
1.5
Place hook on pencil spindle and
tighten the grub screw to secure.
IMPORTANT:
Please install this hardware in the
following order to ensure its warranty
is not voided.
1. Install the hardware on raw/
unfinished door using the
instructions provided.
2. Remove hardware (where possible) and
store safely. Do not place tape onto
the hardware as this will damage the
finish.
3. Paint / finish door.
4. Reinstall hardware.
Figure 1
Figure 2
(2)
(3)
Figure 3
1. Hook
2. Pencil Spindle
3.Grub
Screw
5. Allen Key
4. Wood Screw
Included
Not Included
