Re-tune channels
Re-tune channels – introduction
You can make your television find your TV channels and radio stations for you.
Channels and stations are updated automatically, but it is also possible to update
manually. Depending on your service provider, some settings are made automatically.
Antenna and cable installation
You can reinstall or update tuned terrestrial and cable channels which, for example, have
been moved by the broadcaster. Follow on-screen instructions.
Update channels
Automatic channel update
When you receive digital channels, your television is default set to update these
channels automatically.
New channels are stored in the Channels list and are marked with a
icon. Channels
without a signal are removed. The television must be in standby to update channels
automatically. You can switch off automatic channel update.
To switch off the automatic update…
1. Press
, highlight
Settings
and press the
centre
button.
2. Highlight
Channels
and press
.
3. Highlight
Antenna/Cable Installation
and press the
centre
button.
4. Enter your child lock pin code if necessary.
5. Select
Automatic Channel Update
.
6. Select
Off
.
7. Press
to go back one step or press
to leave the menu.
When new channels are found or if channels are updated or removed, a message is
shown when the television is switched on. To avoid that this message appears after every
channel update, you can switch it off.
To switch off the message…
1. Press
, highlight
Settings
and press the
centre
button.
2. Highlight
Channels
and press
.
3. Highlight
Antenna/Cable Installation
and press the
centre
button.
4. Enter your child lock pin code if necessary.
5. Select
Channel Update Message
.
6. Select
Off
.
7. Press
to go back one step or press
to leave the menu.
On some markets, the automatic channel update is done either while watching television
or when the television is in standby.
Manual channel update
You can always start an channel update yourself.
1. Press
, highlight
Settings
and press the
centre
button.
2. Highlight
Channels
and press
.
3. Highlight
Antenna/Cable Installation
and press the
centre
button.
4. Enter your child lock pin code if necessary.
5. Select
Search for Channels
, then select
Start
.
76
Содержание beovision 14-40
Страница 1: ......