First time setup 19
First time setup
First time setup is a wizard controlled guide that helps configuring the basic settings of the BeoSound Moment. The First time setup is mandatory
to follow at first installation after
delivery from factory and after each
Factory reset to default settings; see
.
Optionally settings for e.g. speaker, media servers and streaming services (Deezer and TuneIn) can be done at any time later. Lift off the Socket
cover, and from the display select between the possibilities for settings.
First of all ensure that the BeoSound Moment hub (SoundHeart) is powered On - Power Status LED is solid green and also that the BeoSound
Moment interface (Jukebox) is charged or placed in charging position on the BeoSound Moment hub (SoundHeart).
Note: The setup sequence brings the BeoSound Moment hub (SoundHeart) temporarily into SoftAP mode. See
Initiating setup
The BeoSound Moment is brought into First time setup by first initiating a
Factory reset
(see
) and after a while the First time setup
wizard will start requesting the needed choices and entries.
Language
-
Choose language
amongst those made available and
then press
�
.
-
Choose country
- choose the proposed country or press
to get a drop down list and select from
this and then press
�
.
-
Choose keyboard language
- choose the proposed
keyboard language or press to get a
drop down list and select from this and then press
�
.
Home router/AP
-
Choose home network
- select from drop down list
and then press
�
.
- Enter the appropriate Password by tapping in the
Password
field and enter password using the keyboard and press
Done
and press
Confirm
.
English
Dansk
Nederlands
Français
Deutsch
Italiano
日本語
한국어
Português
Русский
ㆶ։ѣᮽ
Español
Svenska
繁体中文
Choose language
Choose language - Example of displayed wizard page during First time setup
Содержание BeoSound Moment
Страница 69: ...69...