Appendix 38
Appendix
Setup button function & LED feedback
The setup button can be used for several functions during normal operation of the BeoLink Converter NL/ML.
- To select a function, the setup button must be pressed and held until the desired function has been reached. The number of times the LED flashes
red is corresponding to the actual function. When the setup button is released and the LED starts flashing red, the setup button must be pressed
once within 3 seconds to confirm the function. (Some functions do not require confirmation). The LED will change to orange to indicate that the
selected function is being carried out. The LED goes off for one second, then the LED flashes green <N> times corresponding with the function
number just performed and at last the LED goes off (normal operation).
Example no. 7 (
Reset password
)
- Press and hold the setup button until the LED has flashed red 7 times. Now confirm the function within 3 seconds by pressing the setup button
once. The LED will now change to orange to indicated that the selected function is being carried out.
No. - Function
Confirm
Description
0 - Initial escape
NO
Do nothing (before LED indicator flashes first time)
1 - A Slave (Audio Slave)
Within 3 seconds ML Role seen from Master Link side
2 - A Master (Audio Master)
Within 3 seconds ML Role seen from Master Link side
3 - V Master (Video Master)
Within 3 seconds ML Role seen from Master Link side (default setting)
4 - AV Master (Audio Video Master)
Within 3 seconds ML Role seen from Master Link side
5 - Factory default
Within 3 seconds
Delete configuration - factory default installed
6 - Power up Web
Within 3 seconds Power up Web server (main processor power up)
7 - Reset password
Within 3 seconds
Admin
and
User
password to factory default
8 - Fixed adress
Within 3 seconds
Enables the default fixed IP adress
9 - Dynamic adress
Within 3 seconds Enables DHCP - dynamic IP adress
10 - ML Power safe
Within 3 seconds Not implemented
11 - Escape
NO
Do nothing (LED indicator red)
LED indicattor
Description
Off
Setup button pressed (function 0)
Flashes red once
Function 1 selected
Flashes red twice
Function 2 selected
<N> red flashes
Function <N> selected
Solid red
Escape
Fast flashing red
Waiting for confirmation (after some functions)
Solid orange
The selected operation is being performed. When done the LED is 1 second off and then followed by the confirmation pattern.
Fast flashing green Confirmation pattern. Flashes <N> times corresponding with function no. just performed. 1 second off and then solid green.