Setting up the BeoLink Converter NL/ML 11
Configuration > Sources visible on ML
(ML Role is V Master)
Here is chosen, which network link source that is desired to be distributed to Master link.
ML source
Shows a list of available sources on Master Link retrieved from Network Link. Source
mapping of Beo4 buttons from Master Link rooms to sources on the Network Link.
NL product name
Products connected to the Network Link will be visible in
NL product name
list.
NL source
Network Link sources connected to the Network Link will be visible in
NL source
list.
It is possible to allocate a Network Link source to another Master Link source if
required. This can be done in the drop down box.
! Products connected to the Network Link are detected automatically.
! Remember to save the settings.
Configuration > Experience mapped to NL
(ML Role is V Master)
Experience mapped to NL (Sources visible on NL), tells the Network Link products which Master Link sources should be visible in the
source list
menu on the Network Link products. You can also rename the Master Link sources.
ML source
Shows a list of available sources on Network Link retrieved from Master Link.
Name used on NL
Shows the source names used on the Network Link. The name will be visible in the
source list
menu on the Network Link product and it will be shown on the display
when a button is pressed, e.g. CD. It is possible to enter any name, e.g.
Music
,
Favourites
, etc.
Enabled
Possible to enable/disable a source.
! Remember to save the settings.
