Terminology - Systems 6
Systems
Three types of systems exists as explained below.
BeoLink system
The BeoLink System (i.e. all Bang & Olufsen products based on Network Link and Master Link that are connected to the BeoLink Gateway) is
regarded as an internal system. The BeoLink System can only appear once in the installation. The BeoLink System is per default assigned to the
‘global’ area/ ‘global’ zone’
Home Automation systems
Each Home Automation system is assigned to an ‘area/zone’. This is despite the Home Automation system, may serve more zones where each of
the products the system consists of are placed.
Systems are invisible in the daily use from a user interface point of view. The Home Automation systems may consequently be assigned to the
‘global’ area/’global’ zone. Systems are usually assigned to zones by the installer in the Systems page.
The products making up the system are linked to the area/zone in which it is physically placed. This is assigned in the Resource page.
Virtual Resource systems
A Virtual Resource system is per default assigned to the ‘global’ area/’global’ zone. The Virtual Resource system is the place holder for virtual
resources.