![background image](http://html.mh-extra.com/html/bang-and-olufsen/beolink-1703/beolink-1703_installation-manual_471056054.webp)
Set up BeoLink Gateway - Configuration - Save revision
54
Configuration
To access the Configuration
tools select ‘Configuration’ in
the menu bar. A drop-down
list with the sub-menus will
appear, and any of the sub-
menus can be accessed.
Save revision
Saving a revision means
saving the current
configuration internally in the
BeoLink Gateway.
In the
Description
entry
field, at tag can be entered,
which will be added to a
revision label having the file-name with the following syntax:
rnn | Jan 25, 2015 08:55:37 PM | <tag>,
where n is a revision number.
Such savings are useful when changes have been made to the configuration. The saved revision is available in the Revision history list where it is
placed in the bottom of the list, (see
) and from where it can be restored.
The current configuration is saved internally in the BeoLink Gateway when the
Save
button is pressed. By this the recent autosaved file (see below)
will be discarded.
Up to ten revisions of the configuration can be saved.
If a manually
Save revision
is not made the recent autosaved file will be the recent saved configuration.
Autosave
When configuration of the BeoLink Gateway takes place and the operator has not saved the configuration by a manual Save revision action, the
configuration will be saved every 5
th
minute if configuration activities are ongoing - since last time autosave took place.
If configurations are made and left unsaved and the BeoLink Gateway is idle for more than 30 seconds, autosave will also take place.
These files are added to the Revision history list and marked with the tag: ‘Auto save’; see
When the autosaved configuration is newer than the manually made
Save revision
and in case power is failing or any other malfunctioning of the
system occurs, the BeoLink Gateway will - when restarted - get use of the autosaved configuration file.