Set up BeoLink Gateway - Systems - System settings
28
Systems
The systems settings is for setting-up systems connected to BeoLink Gateway. BeoLink systems and Home Automation systems are ‘systems’.
System settings
Select
+
to add a new home
automation system from the
drop down list. A System may be
added in a specific area/zone
when it only serves functions
there, else if a system serves
more zones it may be added to
the ‘global’ area/’global’ zone.
Any of the supported systems
can be added, except internal
systems, which only appear once
in the installation, such as
BeoLink and Virtual Resources
that are added by default; see
).
When selecting a system added
to one zone, it is possible to select another zone in the
Zone
drop down list, by which the system is moved to that zone. A system can also be
rename and the
configuration
and connection settings can also be changed.
Systems are assigned to zones by the installer. Systems are invisible in the user interfaces.
BeoSound 5 host
When a BeoSound 5 is part of the system setup, the IP-address for this must be entered in the
BeoSound 5 host
entry field
System status icons
For each system installed, a text string icon is shown in the bottom of the screen (e.g.
). The status of each system is indicated by a colour of
the background of the text string icon. Green = Online; Orange = Connecting; Red = Error; Grey = Synchronizing. This gives a quick status
indication on each system. Moving the mouse pointer to each icon displays a pop-up message.
If a system cannot connect, the system logs should be checked for information about the problem.