NanoRam
®
Series
Handheld Raman
19 Shea Way, Newark, DE 19713, USA
•
Tel: +1 (302) 368-7824
•
Fax: +1 (302) 368-7830
•
Web: www.bwtek.com
290020255-J (2017/07/28)
Page 11 of 38
Copyright 2017 B&W Tek
Located on the rear panel of the system, the manufacturer’s general identification label
includes warning information and also displays the manufacturer name, address, model
number, serial number, and the manufacturing date.
2. Knowing Your Instrument
2.1.
Power Supply
The unit can be run on either external power supply or on battery. Before using the unit
with the battery, make sure that the battery is fully charged. The battery status can be
found on the top right corner of the screen in ‘operation’ displays, or the center of the
screen when in charging only mode. The NanoRam battery can be charged with the
12VDC power adaptor or optional charging cradle. The NanoRam Mini battery can be
charged with the 18VDC power adaptor or optional charging cradle.
Note:
It is recommended to charge the battery only when the unit is not in use.
2.2.
Battery Installation and Charging
Locate and identify the battery cover at the bottom end of the unit.
Note:
there are two versions of battery door design: version A and B. To identify: version
A does not have any sign on the bottom cover while version B has an unlock sign near
the ring. Turn counterclockwise to unlock if you have version A and turn clockwise to
unlock if you have version B.
Version A Version B
