B&R Power Panel T30, Руководство пользователя

Страница: 67 / 140

Configuration • Service pages
Power Panel T30 User's manual V1.42 - Translation of the original documentation 67
5.1.7 Service page Hand button
The Hand button configured using the settings on this service:
Startup
Network
Time
Screen
Audio
Hand button
VNC
Web
Open service page
✓
Use button in user application
Open service page
Default setting: Enabled
Enabled
In VNC/Web mode, the service page can be opened using the Hand button.
Disabled In VNC/Web mode, the service page cannot be opened using the Hand button. A mouse must be
connected in order to open the service page in VNC/Web mode (see "Mouse" on page 53 ).
Use button in user application
Default setting: Disabled
Enabled The Hand button can be used for applications in the VNC/Web mode. If the Hand button is pressed,
this information is transferred to the server (configuration in Automation Studio). The transfer to the
server only takes place after releasing the Hand button.
The service page can be opened using the Hand button by pressing it for more that 5 seconds when
option Open service page is enabled.
Disabled The Hand button behaves as described in option
Open service page
. The service page is opened
immediately when the Hand button is pressed if option
Open service page
is enabled.
Assign key code to button
This option is only shown if
Use button in user application
is enabled:
Startup
Network
Time
Screen
Audio
Hand button
VNC
Web
Open service page
✓
Use button in user application
✓
Assign key code to button
Default setting: Disabled
Enabled
Input field Button key code is shown.
Disabled A key code is not sent to the application.
Information:
The key code is only used for Web mode.