Technical data • Individual components
Chapter 2
Technical data
Panel PC 800 User's Manual V1.30
93
3.9.5 5AC801.SSDI-00
3.9.5.1 General information
This 32 GB slide-in compact SSD (solid-state drive) is based on single-level cell (SLC) technology and can be
used in APC810 and PPC800 system units.
When used in a PPC800
Information:
The adapter 5AC803.BC02-00 is required for the use of slide-in compact drives.
When inserted in the slide-in compact slot, the slide-in compact drive is accessed internally via SATA.
3.9.5.2 Order data
Model number
Short description
Figure
Drives
5AC801.SSDI-00
32 GB SATA SSD (SLC), slide-in compact
Table 72: 5AC801.SSDI-00 - Order data
3.9.5.3 Technical data
Caution!
A sudden loss of power may result in data loss! In very rare cases, the mass storage device may also
become damaged.
To prevent damage and loss of data, the use of a UPS device is recommended.
Information:
The following characteristics, features and limit values only apply to this individual component and can
deviate from those specified for the complete system. For the complete system in which this individual
component is used, refer to the data given specifically for that device.
Product ID
5AC801.SSDI-00
General information
Certification
CE
Yes
cULus
Yes
GOST-R
Yes
GL
Yes
1)
Solid state drive
Capacity
32 GB
Data reliability
<1 unrecoverable error in 10
15
bit read accesses
MTBF
2,000,000 hours
Power on/off cycles
50,000
S.M.A.R.T. support
Yes
Interface
SATA
Maintenance
None
Sequential read
Max. 250 MB/s
Sequential write
Max. 170 MB/s
Table 73: 5AC801.SSDI-00 - Technical data