Technical data • Individual components
Chapter 2
Technical data
Panel PC 800 User's Manual V1.30
89
3.9.3 5AC801.HDDI-03
3.9.3.1 General information
This 250 GB slide-in compact hard disk is specified for 24-hour operation and can be used in APC810 and PPC800
system units.
When used in a PPC800
Information:
The adapter 5AC803.BC02-00 is required for the use of slide-in compact drives.
When inserted in the slide-in compact slot, the slide-in compact drive is accessed internally via SATA.
3.9.3.2 Order data
Model number
Short description
Figure
Drives
5AC801.HDDI-03
250 GB slide-in compact SATA hard disk, 24/7 operation. Note:
please see the manual for information about using this hard disk
Optional accessories
Drives
5MMHDD.0250-00
250 GB SATA hard disk; replacement for 5AC801.HDDI-03 and
5ACPCI.RAIC-05; note: please see the manual for information
about using this hard disk
Table 68: 5AC801.HDDI-03 - Order data
3.9.3.3 Technical data
Information:
The following characteristics, features and limit values only apply to this individual component and can
deviate from those specified for the complete system. For the complete system in which this individual
component is used, refer to the data given specifically for that device.
Product ID
5AC801.HDDI-03
General information
Certification
CE
Yes
cULus
Yes
cULus HazLoc Class 1 Division 2
Yes
1)
ATEX Zone 22
Yes
1)
GOST-R
Yes
GL
Yes
1)
Hard disk drive
Capacity
250 GB
Number of heads
1
Number of sectors
488,397,168
Bytes per sector
512
Cache
8 MB
Speed
5400 rpm ±0.2%
Startup time
Typ. 3.6 s (from 0 rpm to read access)
MTBF
550,000 POH
2)
S.M.A.R.T. support
Yes
Interface
SATA
Access time
5.56 ms
Supported transfer modes
SATA 1.0, Serial ATA Revision 2.6
PIO mode 0-4, multiword DMA mode 0-2, UDMA mode 0-6
Data transfer rate
Internal
Max. 1175 Mbit/s
To/From host
Max. 150 MB/s (SATA I), max. 300 MB/s (SATA II)
Table 69: 5AC801.HDDI-03 - Technical data