Maintenance and service • Installing the slide-in compact adapter
346
Panel PC 800 User's Manual V1.30
6 Installing the slide-in compact adapter
Slide-in compact adapters can be installed and replaced in system units with 1 card slot or in expansions with 2
card slots. A slide-in compact drive (e.g. slide-in compact HDD) can be installed in a slide-in slot using the slide-
in compact adapter.
6.1 Procedure
1. Disconnect the power supply to the B&R Industrial PC.
2. Touch the housing or ground connection in order to discharge any electrostatic charge from your body.
3. Remove the dummy slide-in module or slide-in drive by unscrewing the two quick release screws.
Figure 200: Loosening the quick release screws
4. Insert the slide-in compact adapter and tighten the two quick release screws.
Figure 201: Installing the slide-in compact adapter
5. Once the adapter has been installed, the slide-in compact drive can be inserted.