Maintenance and service • Changing the battery
Chapter 7
Maintenance and service
Panel PC 800 User's Manual V1.30
341
Battery cover
Removal strip
Figure 192: Removing the battery
•
The battery should not be held by its edges. Insulated tweezers may also be used to insert the battery.
Correct
Incorrect
Figure 193: Battery handling
•
Insert the new battery with the correct polarity.
Figure 194: Battery polarity
•
To make the next battery replacement easier, be sure the removal strip is in place when inserting the battery.
•
Reconnect the power supply to the B&R Industrial PC (plug in the power cable).
•
Reset the date and time in BIOS.
Warning!
Lithium batteries are considered hazardous waste. Used batteries should be disposed of in accordance
with applicable local regulations.