Software • BIOS options
212
Panel PC 800 User's Manual V1.30
1.5 Boot
Main Advanced
Security Power Exit
Boot
Boot Priority Selection [Type Based]
Boot Device Priority
Boot Settings Configuration
The device based boot
priority list allows
to select from a list
of currently detected
1st Boot Device [Primary Master] devices.
2nd
Select Screen
Select Item
+- Change Option
Quick Boot [Enabled] F1 General Help
Quiet Boot [Disabled] F10 Save and Exit
Automatic Boot List Retry [Disabled] ESC Exit
AddOn ROM Display Mode [Keep Current]
Halt On Error [Disabled]
Hit ´DEL´ Message Display [Enabled]
Interrupt 19 Capture [Disabled]
PXE Boot to LAN (ETH1) [Disabled]
Slide-In 2 Option-ROM [Disabled]
Power Loss Control [Turn On]
Boot Device [Primary Slave] The type based boot
3rd Boot Device [USB Floppy] priority list allows
4th Boot Device [USB Removable Devi] to select device types
5th Boot Device [USB Harddisk] even if a respective
6th Boot Device [USB CDROM] device is not (yet)
7th Boot Device [Secondary Master] present.
8th Boot Device [Secondary Slave]
BIOS SETUP UTILITY
v02.59 (C)Copyright 1985-2005, American Megatrends, Inc.
Figure 118: 945GME Boot Menü
BIOS setting
Function
Configuration options
Effect
Device based
Only lists devices that are recognized by the
system. The order of devices in this list can be
changed.
Information:
It is only possible to use either "Device
based" or "Type based". Using both to-
gether is not permitted.
Boot priority selection
Option for determining the method for how drives
should be booted
Type based
The boot sequence of a device type list can be
changed. It is also possible to add device types
that are not connected to this list.
Information:
It is only possible to use either "Device
based" or "Type based". Using both to-
gether is not permitted.
1st boot device
2nd boot device
3rd boot device
4th boot device
5th boot device
6th boot device
7th boot device
8th boot device
Option for selecting drives to be used for booting Disabled, Primary master, Pri-
mary slave, Secondary master,
Secondary slave, Legacy flop-
py, USB floppy, USB hard disk,
USB CDROM, USB removable
device, Onboard LAN, External
LAN, PCI mass storage, PCI
SCSI card, Any PCI BEV device,
Third master, Third slave, PCI
RAID, Local BEV ROM
Specifies the desired boot sequence
Enabled
Enables this function
Quick boot
This function reduces the boot time by skipping
some POST procedures.
Disabled
Disables this function
Enabled
Displays the OEM logo instead of the POST
message
Quiet boot
Determines whether the POST message or the
OEM logo (default = black background) is dis-
played
Disabled
Displays the POST message
Enabled
Enables this function
Automatic boot list retry
This option can be used to attempt to restart the
operating system automatically if it fails to start
the first time.
Disabled
Disables this function
Table 166: 945GME Boot menu - Configuration options