Technical data • Individual components
140
Panel PC 800 User's Manual V1.30
3.9.24 5MMHDD.0250-00
3.9.24.1 General information
This 250 GB hard disk can be used as a replacement part or accessory.
•
250 GB hard disk
•
Replacement hard disk for a 5AC801.HDDI-03 hard disk or a 5ACPCI.RAIC-05 RAID controller
•
APC510 accessory (optional hard disk for the I/O board)
•
Specified for 24-hour operation
•
S.M.A.R.T. support
3.9.24.2 Order data
Model number
Short description
Figure
Drives
5MMHDD.0250-00
250 GB SATA hard disk; replacement for 5AC801.HDDI-03 and
5ACPCI.RAIC-05; note: please see the manual for information
about using this hard disk
Table 110: 5MMHDD.0250-00 - Order data
3.9.24.3 Technical data
Caution!
A sudden loss of power may result in data loss! In very rare cases, the mass storage device may also
become damaged.
To prevent damage and loss of data, the use of a UPS device is recommended.
Information:
The following characteristics, features and limit values only apply to this individual component and can
deviate from those specified for the complete system. For the complete system in which this individual
component is used, refer to the data given specifically for that device.
Product ID
5MMHDD.0250-00
General information
Certification
CE
Yes
cULus
Yes
cULus HazLoc Class 1 Division 2
Yes
1)
GOST-R
Yes
Hard disk drive
Capacity
250 GB
Number of heads
1
Number of sectors
488,397,168
Bytes per sector
512
Cache
8 MB
Speed
5400 rpm ±0.2%
Startup time
Typ. 3.6 s (from 0 rpm to read access)
MTBF
550,000 POH
2)
S.M.A.R.T. support
Yes
Interface
SATA
Access time
5.56 ms
Supported transfer modes
SATA 1.0, Serial ATA Revision 2.6
PIO mode 0-4, multiword DMA mode 0-2, UDMA mode 0-6
Data transfer rate
Internal
Max. 1175 Mbit/s
To/From host
Max. 150 MB/s (SATA I), max. 300 MB/s (SATA II)
Positioning time
Minimum (track to track)
1 ms
Nominal (read only)
14 ms
Maximum (read only)
30 ms
Table 111: 5MMHDD.0250-00 - Technical data