manualshive.com logo in svg

B&R Mobile Panel 7200, Руководство пользователя

Поделиться
Скачать
B&R Mobile Panel 7200 Скачать руководство пользователя страница 45

 Commissioning

Mobile Panel 7200 User's manual V 1.01

45

3.8 Using the USB interface

Caution!

IP65 protection can only be achieved if the USB protective cover is properly installed.

Warning!

USB peripheral devices can be connected to the USB interfaces. Due to the variety of USB devices

available on the market, B&R cannot guarantee their functionality. The functionality of USB devices

available from B&R is guaranteed.

Connecting a USB device

1. Open the USB protective cover.
2. Connect the USB device until it clicks into place.

✓

The USB device is recognized and can be used.

Information:

If a USB device is disconnected during a save procedure, data may be lost.

Disconnecting a USB device

1. Complete all processes that access the USB device.
2. Disconnect the USB device from the USB interface.
3. Press the protective cover down firmly and completely.

✓

The USB device is disconnected and the degree of protection is restored.

Содержание Mobile Panel 7200

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды