B&R MAPPC700A-ENG, Руководство пользователя

Страница: 88 / 524

88
Technical data • Entire device
Panel PC 700 with 945GME N270 CPU board User's Manual V 1.16
2.4.16 PS/2 keyboard / mouse
Slot for a standard PS/2 mouse or a PS/2 AT-Enhanced keyboard. BIOS automatically
determines whether a mouse or a keyboard has been connected and passes this information to
the operating system.
With a PS/2 Y-cable, both keyboard and mouse can be operated simultaneously. They must be
connected before the system is switched on.
This interface has a "hot plug" function for PS/2 keyboards (only when no PS/2 mouse has ever
been connected and used!).
Warning!
A system reset can result in data loss!
Connection for keyboard/mouse (PS/2)
Pin Assignment PS/2 socket, female
1 DATA 0
2 DATA 1
3 GND
4 +5 V
1)
1) The PS/2 keyboard/mouse interface is protected by a multifuse (1A).
5 CLK 0
6 CLK 1
Table 45: Connection for external keyboard/mouse (PS/2)
Warning!
Because of general PC specifications, this interface should be used with extreme
care concerning EMC, location of cables, etc.. It should therefore only be used for
service!
Information:
The BIOS setup defaults only allow for the operation of a PS/2 keyboard. If a PS/2
mouse is connected, it must be enabled in BIOS. In order to do this, set "PS/2
mouse" in the BIOS setup menu to "Enabled" and save. (Located under "Advanced"
/ "Miscellaneous" / "PS/2 mouse").
6 4
3 5
2
1