Technical data • Individual components
46
Automation Panel 9x3 User's Manual V1.00
3.2 Link modules
3.2.1 5DLSDL.1001-00
3.2.1.1 General information
•
Link module for Automation Panel 9x3 systems
•
1x SDL/DVI Panel In interface
•
2x USB 2.0 type A
•
1x USB In (USB typ B)
•
1x RS232 interface
•
Display brightness dial
3.2.1.2 Order data
Model number
Short description
Figure
Undefined
5DLSDL.1001-00
Automation Panel Link module SDL/DVI - Receiver - For Au-
tomation Panel 923/933
Table 43: 5DLSDL.1001-00 - Order data
3.2.1.3 Technical data
Product ID
5DLSDL.1001-00
General information
B&R ID code
$E1A4
Brightness button
Yes
1)
Interfaces
COM1
Type
RS232, modem-capable, not electrically isolated
Design
9-pin male DSUB connector
Max. baud rate
9.6 kbit/s
USB
Quantity
3 (2x Type A; 1x Type B)
Type
USB 2.0
Design
2x Type A
1x Type B
Transfer rate
Low speed (1.5 Mbit/s), full speed (12 Mbit/s), high speed (480 Mbit/s)
Current load
A total of max. 1 A
2)
Panel In
Design
Female DVI-D connector
Type
SDL/DVI
Electrical characteristics
Nominal voltage
24 VDC ±25%
Nominal current
Max. 2.5 A
Electrical isolation
Yes
Mechanical characteristics
Dimensions
Width
190 mm
Height
110 mm
Depth
23.6 mm
Weight
538 g
Table 44: 5DLSDL.1001-00 - Technical data
1)
The brightness dials can be used to control the brightness of the backlight on the Automation Panel 9x3 in DVI operating mode.
2)
For the 2 USB type A female connectors.
