background image

Software 

180

Automation Panel 5000 User's manual V2.11

7.8 KCF Editor

The KCF Editor can be used as a simple alternative to the Key Editor. It can

also be used to adapt function keys and LEDs to the application software. In

contrast to the Key Editor, operation does not take place using a graphical

representation of the device, but via a simple Windows dialog box. The KCF

Editor can therefore also be used for devices that are not yet supported in

the Key Editor. The KCF Editor is a "portable" application and can be started

directly from a USB flash drive without installation on the target device, for

example.
An installed ADI driver is required for the full range of functions.

Features:

Configuration of normal keys like on a keyboard (A, B, C, etc.)

Special key functions (change brightness, etc.)

Assignment of LED functions (HDD access, power, etc.)

4 assignments possible per key (using layers)

Configuration of the panel lock time when connecting several Automation Panel devices to B&R PCs.

Export and import of the configuration (via INI files)

Save configuration as report (text file)

If the KCF Editor is running on the target device and the ADI driver is installed, the following additional features

are available:

Panel and key detection

LED test

Download/Upload the configuration

Содержание Automation Panel 5000

























































































































































































































Отзывы: