B&R ACOPOSinverter P84, Руководство пользователя

Страница: 208 / 405

Programming guidelines
208 ACOPOSinverter P84 User's Manual 2.10
Code Name/Description Setting range Factory settings
Level of DC injection braking current activated via logic input or selected as stop mode. The parameter is accessible if [STOP MODE] (Stt) = [DC
Brak.] (dCI) or if [DC Brak.] (dCI) is not equal to [No] (nO) .
Caution!
Check that the motor will withstand this current without overheating.
Failure to follow this instruction can result in equipment damage.
tdI [DC injection time 1]
1)3)
0.1 to 30 s 0.5 s
Maximum duration of current injection [Current DC brake 1] (IdC) . After this time has expired, the DC connection becomes
[DC current brake 2] (IdC2) .
The parameter is accessible if [STOP MODE] (Stt) = [DC Brak.] (dCI) or if [DC Brak.] (dCI) is not equal to [No] (nO) .
IdC2 [DC inject. level 2]
1)3)
0.1 In
2)
to
[DC current brak. 1] (IdC)
0.5 In
2)
The braking current is activated by the logic input or as a stop mode is selected, once the time span [DC injection time 1] (tdI) has expired.
The parameter is accessible if [STOP MODE] (Stt) = [DC Brak.] (dCI) or if [DC Brak.] (dCI) is not equal to [No] (nO) .
Caution!
Check that the motor will withstand this current without overheating.
Failure to follow this instruction can result in equipment damage.
tdC [DC injection time 2]
1)3)
0.1 to 30 s 0.5 s
Maximum braking time [DC current brak. 2] (IdC2) for the DC injection, only selected as stop mode.
Parameters accessible if [STOP MODE] (Stt) = [DC brak.] (dCI) .
1) This parameter can also be accessed via the [SETTINGS] (SEt-) menu.
2) In corresponds to the rated inverter current indicated in the Installation Manual and on the inverter nameplate.
3) Warning: These settings are independent of the function [Auto DC injection] (AdC-) .
Parameter that can be modified during operation or when stopped.