B&R 8I84T200037.01P-1, Руководство пользователя

Страница: 306 / 405

Programming guidelines
306 ACOPOSinverter P84 User's Manual 2.10
2.8.12.8 Cards pairing
Function can only be activated in [expert] mode
This function is used to detect whenever a card has been replaced or the software has been modified in any way.
When a pairing password is entered, the parameters of the cards currently inserted are stored. At each subsequent
start, the parameters are checked and if a deviation exists, the inverter locks with the HCF fault. For a restart, the
initial situation must be restored or the joining code must be entered again.
The following parameters are verified:
• Card type: For all cards
• Software version: With the two control cards and the communication cards.
•
Serial number: On the two control cards.
[CARDS PAIRING] (PPI-)
Code Name/Description Setting range Factory settings
PPI- [CARDS PAIRING]
PPI [Pairing password] OFF to 9999 [Off] (OFF)
The value [Off] (OFF) indicates that the card pairing function is not active.
The value [On] (On) indicates that the card pairing is activated and an access code must be entered to release the inverter in the event of a
pairing error.
Once the code has been entered, the inverter is released and the code changes to
[On]
(On) .
•
The PPI code is an unlock code known only to B&R Product Support.