B&R 8I84T200037.01P-1, Руководство пользователя

Страница: 115 / 405

Programming guidelines
ACOPOSinverter P84 User's Manual 2.10 115
2.7.2 Accessing the menus
SIMPLE START
MONITORING
SETTINGS
MOTOR CONTROL
INPUTS / OUTPUTS CFG
COMMAND
APPLICATION FUNCT.
ERROR MANAGEMENT
COMMUNICATION
FACTORY SETTING
CUSTOMER-SP MENU
Not applicable
ACCESS CODE
ACCESS LEVEL
Switching on
Indicates the status of the inverter
Simplified menu for simple start
Visualization of current, motor and input/output values
Setting parameters that can be changed during operation
Motor parameters (motor nameplate, autotuning, Switching
frequency, control algorithms, etc.)
I/O configuration (scaling, encoder, 2-wire control, 3-wire control etc.)
Konfiguration der Anwendungsfunktionen (z. B. Vorwahlfrequenzen,
PID controller, brake logic, etc.)
Configuration of the error management
Communication parameters ( Fieldbus)
Access the configuration files and reset to factory setting
Special menu that the user sets up with the graphic display terminal
Configuration of the application functions (e.g. preset frequencies,
Klemmenleisten, Bus usw.)
Menu
A hyphen is displayed behind the menu and submenu codes to distinguish them from parameter codes
Examples: Menu FUn-, Parameter ACC.
Grayed-out menus might not be retrievable depending on the configuration of the access level LAC.