Commissioning
Mobile Panel 7100 User's manual 1.51
69
Safety category SIL 3 per EN 61508 is an option for the enabling device with two enable switches.
It is the machine manufacturer's responsibility to select a handheld terminal suitable for the machine and to con-
figure any additional add-on options in accordance with the legally required danger and risk assessment.
The information in chapter
"Standards and certifications" on page 118
regarding the intended use of the handheld
terminal must also be observed.
3.2 Operating the Mobile Panel
Caution!
•
When routing or laying cables, make sure that there is no danger of tripping that could cause
the Mobile Panel device to fall to the ground.
•
The Mobile Panel attachment cable is not permitted to be crushed or run over sharp edges that
which can damage or chafe the cable jacket.
•
Operating a Mobile Panel with a damaged attachment or control cabinet cable is not permitted.
•
When the Mobile Panel is not in use, it should be safely stowed away on the intended wall
mount. If the Mobile Panel device is stored on a wall mount in the machine's danger zone, stop
button functionality must be ensured, i.e. the attachment cable must be connected.
•
If temporarily putting down the Mobile Panel device, do not place it face down in a way that
could damage the control devices or inadvertently trigger actions.
•
The touch screen is not permitted to be operated with sharp objects such as ballpoint pens,
knives, screwdrivers, etc. These objects will cause irreparable damage to the touch screen. The
ideal object for operating the touch screen is the integrated touch screen stylus pen (
"Touch screen stylus pen" on page 18
). The touch screen can also be operated with a finger.
•
Only one point on the touch screen is permitted to be touched at a time. Touching several places
simultaneously can trigger unintended actions.
•
Placing objects on top of the touch screen is not permitted.
•
Never lay the device down on unstable surfaces or shelves. It could fall and become damaged.
•
Never expose the device to heat sources or direct sunlight.
•
Ensure that no foreign bodies or liquids penetrate the interior of the device.
•
Pressing several function or system keys simultaneously can trigger unintended actions in
some circumstances.
Information:
•
All protective coverings, housing screws, cable grommets and the device housing must be
checked periodically for damage.
•
For instructions on how to clean the Mobile Panel device,
.