B&R 5PP551.0573-00, Руководство пользователя

Страница: 199 / 253

Software • Automation Runtime
Chapter 4
Software
Power Panel 500 User's Manual V 1.00 199
6 Automation Runtime
6.1 General Information
A integral component of Automation Studio is the real-time operating system. This real-time
operating system makes up the software kernel which allows applications to run on a target
system.
• Guaranteed highest possible performance for the hardware being used
• Runs on all B&R target systems
• Makes the application hardware-independent
• Applications can be easily ported between B&R target systems
• Cyclic runtime system guarantees deterministic behavior
• Multitasking according to deterministic runtime rules
• Configure priorities, time classes, and jitter tolerance
• Up to eight different time classes with any subprograms
• Guaranteed response to time violations and exceeding jitter tolerances
• Exception handling
• Configurable jitter tolerance in all task classes
• Supports all relevant programming language such as IEC 61131-3 and ANSI C
• Extensive function library conforming to IEC 61131-3 as well as the expanded Au-
tomation library
• Access to all networks and bus systems via function calls or the Automation Studio
configuration
B&R Automation Runtime™ is fully embedded in the corresponding target system (this is the
hardware where Automation Runtime™ is installed). It allows application programs to access
I/O systems (e.g. via fieldbus) and other devices (interfaces, networks, etc.).
6.2 Order data
Model number Short description Figure
Automation Runtime
1A4600.10-5
1A4601.06-5
1A4601.06-T
Table 132: 1A4600.10-5, 1A4601.06-5, 1A4601.06-T - Order data