Accessories • Interface board connector
Chapter 6 Accessories
Power Panel 500 user's manual V1.40
251
3 Interface board connector
3.1 0TB1208.3100
3.1.1 General information
The 2-row 8-pin terminal block TB1208 is used to connect to various Power Panel 500 interface boards.
3.1.2 Order data
Model number
Short description
Figure
Terminal blocks
0TB1208.3100
Connector, 8-pin cage clamp, 1 mm², protected against vibration
by the screw flange
Table 191: 0TB1208.3100 - Order data
3.1.3 Technical data
Product ID
0TB1208.3100
General information
Certification
CE
Yes
cULus
Yes
GL
Yes
1)
Terminal block
Note
Nominal values according to UL
Number of pins
8 (female)
Type of terminal clamp
Tension spring connection
Cable type
Only copper wires (no aluminum wires!)
Distance between contacts
3.5 mm
Connection cross section
AWG wire
28 to 18 AWG
Wire end sleeves with plastic covering
0.13 to 0.34 mm²
Solid wires
0.20 to 1 mm²
Fine strand wires
0.20 to 1 mm²
With wire end sleeves
0.13 to 0.34 mm²
Electrical characteristics
Nominal voltage
300 V
Nominal current
2)
10 A / contact
Table 192: 0TB1208.3100 - Technical data
1)
Yes, although applies only if all components installed within the complete system have this certification
2)
The limit data for each I/O module must be taken into consideration.
